Measure your desk’s width and compare it with the recommended desk-width range for each model. Make sure there is enough floor space for the frame. If you need help choosing, send us your desk measurements and a photo of your setup.

No. KOKOPEGBOARD has a freestanding, floor-supported frame, so no wall drilling is required. The frame is assembled using the supplied connectors and screws, keeping your walls intact.

For everyday use, we recommend a total load of no more than 40 kg (88.2 lbs) per shelf. If placing a PC tower on a shelf, keep the tower’s weight at or below 30 kg (66.1 lbs), including it in the shelf’s total load.

In our load test, the shelf and support hooks on the 31.5-inch-wide model supported 69.5 kg (153.2 lbs) without visible deformation or loosening. This demonstrates performance under the tested conditions and does not increase the recommended everyday load. Distribute weight evenly and make sure all supports are securely installed.

The main structure is made from cold-rolled steel with a protective coating for rust resistance and everyday durability. To protect the finish, wipe it clean with a soft cloth, dry any moisture promptly, and avoid abrasive cleaners.

Yes. The shelves can be repositioned to accommodate different equipment and display arrangements. Before adjusting a shelf, remove all items, then make sure the support brackets are securely seated before placing items back on it.

The pegboard has 6 mm holes with 25 mm center-to-center spacing. Third-party accessories may fit, but compatibility also depends on their mounting design. Check the dimensions before purchasing, or send us the accessory details for help checking compatibility.

Assembly typically takes around 20–30 minutes, depending on the model and your experience. A printed guide is included, and a step-by-step installation video is available. No electric drill is required.

Yes. Cables can be routed behind the panels and secured with cable organizers or hook-and-loop straps for a cleaner setup. Leave enough slack for equipment connections and adjustments, and keep cables clear of joints where they could be pinched.